cctv camera multiplexers

Mono 4 Channel Duplex Multiplexer (Part number: 15-MP20) Monochrome 4 channel full duplex digital video multiplexer with alarm, on screen display, telemetry, motion detection, zoom, loop through including power supply

The 15-MP20 duplex multiplexer enables simultaneous recording and playback with the use of two digital independent channels. The first one is used for the live cameras displaying or for the playback on the split screen and the second one is used for the recording to the time lapse recorder.

Remote controlling of external equipment (PAN/TILT systems, lenses, multiplexers) by the CAN interface. 

The integrated activity detector observes all connected cameras continuously and provides their optimal recording. The alarm signal from the activity detector is leaded out to the alarm output.

The 15-MP20 has a wide range of alarm processing from alarm inputs, activity detector and camera fails. The alarm events are stored to internal memory of multiplexer. 
Features include:- 
Duplex operation
4 channel, 
High resolution, 
On screen display, 
Time & date generator, 
Real time, 
Motion Detection
Alarm function, 
Telemetry control of PTZ
Quad , Sequence or Full screed display
Quad screen VCR output
Spot Monitor Outputs 
SPECIFICATIONS 

General 
Power supply 12 VDC 
Power consumption 7 W max. 
Range of operating temp. 0-40°C 
Humidity 85% max 
Dimensions 436 x 44.5 x 230 mm 
Weight 3 kg 
Picture parameters 
TV standards PAL (CCIR) 
Active TV lines 576 
Samples per TV line 864 
Grey shades 256 
Video inputs 
Number of video inputs 4, (composite), 1 (S-VIDEO) 
Amplitude 0.75-1.5 Vpp 
Input impedance 75 W (detachable for composite only) 
Connectors BNC (composite), MINI DIN 4 (S-VIDEO) 
Outputs 
Number of video outputs 3 independent (composite), 2 S-VIDEO 
Amplitude 1 Vpp at 75 W 
Connectors BNC (composite), MINI DIN 4 (S-VIDEO) 
Alarm inputs 
Number of alarm inputs 4, 
Activity Programmable 
Connector D-SUB25M 
Alarm output 
Output 2 low voltage relay contacts 
Switching voltage 40 V 
Switching current 0.5 A 
CAN bus 
Number of addressable devices 240 
Baud rate 50 kBd 
Bus length max. 1000 m 

Colour 4 Channel Duplex Multiplexer (Part number: 15-MP21) Colour 4 channel full duplex digital video multiplexer with alarm, on screen display, telemetry, motion detection, zoom, loop through including power supply

The 15-MP21 duplex multiplexer enables simultaneous recording and playback with the use of two digital independent channels. The first one is used for the live cameras displaying or for the playback on the split screen and the second one is used for the recording to the time lapse recorder.

Remote controlling of external equipment (PAN/TILT systems, lenses, multiplexers) by the CAN interface. 

The integrated activity detector observes all connected cameras continuously and provides their optimal recording. The alarm signal from the activity detector is leaded out to the alarm output.

The 15-MP21 has a wide range of alarm processing from alarm inputs, activity detector and camera fails. The alarm events are stored to internal memory of multiplexer. 
Features include:- 
Duplex operation
4 channel, 
High resolution, 
On screen display, 
Time & date generator, 
Real time, 
Motion Detection
Alarm function, 
Telemetry control of PTZ
Quad , Sequence or Full screed display
Quad screen VCR output
Spot Monitor Outputs 
SPECIFICATIONS 

General 
Power supply 12 VDC 
Power consumption 7 W max. 
Range of operating temp. 0-40°C 
Humidity 85% max 
Dimensions 436 x 44.5 x 230 mm 
Weight 3 kg 
Picture parameters 
TV standards PAL (CCIR) 
Active TV lines 576 
Samples per TV line 864 
Number of colours 16 millions 
Video inputs 
Number of video inputs 4, (composite), 1 (S-VIDEO) 
Amplitude 0.75-1.5 Vpp 
Input impedance 75 W (detachable for composite only) 
Connectors BNC (composite), MINI DIN 4 (S-VIDEO) 
Outputs 
Number of video outputs 3 independent (composite), 2 S-VIDEO 
Amplitude 1 Vpp at 75 W 
Connectors BNC (composite), MINI DIN 4 (S-VIDEO) 
Alarm inputs 
Number of alarm inputs 4, 
Activity Programmable 
Connector D-SUB25M 
Alarm output 
Output 2 low voltage relay contacts 
Switching voltage 40 V 
Switching current 0.5 A 
CAN bus 
Number of addressable devices 240 
Baud rate 50 kBd 
Bus length max. 1000 m 

Mono 10 Channel Duplex Multiplexer (Part number: 15-MP30) Monochrome 10 channel full duplex digital video multiplexer with alarm, on screen display, telemetry, motion detection, zoom, loop through including power supply

The 15-MP30 duplex multiplexer enables simultaneous recording and playback with the use of two digital independent channels. The first one is used for the live cameras displaying or for the playback on the split screen and the second one is used for the recording to the time lapse recorder.

Remote controlling of external equipment (PAN/TILT systems, lenses, multiplexers) by the CAN interface. 

The integrated activity detector observes all connected cameras continuously and provides their optimal recording. The alarm signal from the activity detector is leaded out to the alarm output.

The 15-MP30 has a wide range of alarm processing from alarm inputs, activity detector and camera fails. The alarm events are stored to internal memory of multiplexer.

Features include:- 
Duplex operation
10 channel, 
High resolution, 
On screen display, 
Time & date generator, 
Real time, 
Motion Detection
Alarm function, 
Telemetry control of PTZ
Quad , Sequence or Full screed display
Quad screen VCR output
Spot Monitor Outputs 
SPECIFICATIONS 

General 
Power supply 12 VDC 
Power consumption 7 W max. 
Range of operating temp. 0-40°C 
Humidity 85% max 
Dimensions 436 x 44.5 x 230 mm 
Weight 3 kg 
Picture parameters 
TV standards PAL (CCIR) 
Active TV lines 576 
Samples per TV line 864 
Grey shades 256 
Number of colours 16 millions 
Video inputs 
Number of video inputs 10 (composite), 1 (S-VIDEO) 
Amplitude 0.75-1.5 Vpp 
Input impedance 75 W (detachable for composite only) 
Connectors BNC (composite), MINI DIN 4 (S-VIDEO) 
Outputs 
Number of video outputs 3 independent (composite), 2 S-VIDEO 
Amplitude 1 Vpp at 75 W 
Connectors BNC (composite), MINI DIN 4 (S-VIDEO) 
Alarm inputs 
Number of alarm inputs 10 
Activity Programmable 
Connector D-SUB25M 
Alarm output 
Output 2 low voltage relay contacts 
Switching voltage 40 V 
Switching current 0.5 A 
CAN bus 
Number of addressable devices 240 
Baud rate 50 kBd 
Bus length max. 1000 m 

Colour 10 Channel Duplex Multiplexer (Part number: 15-MP40) Colour 10 channel full duplex digital video multiplexer with alarm, on screen display, telemetry, motion detection, zoom, loop through including power supply

The 15-MP40 duplex multiplexer enables simultaneous recording and playback with the use of two digital independent channels. The first one is used for the live cameras displaying or for the playback on the split screen and the second one is used for the recording to the time lapse recorder.

Remote controlling of external equipment (PAN/TILT systems, lenses, multiplexers) by the CAN interface. 

The integrated activity detector observes all connected cameras continuously and provides their optimal recording. The alarm signal from the activity detector is leaded out to the alarm output.

The 15-MP40 has a wide range of alarm processing from alarm inputs, activity detector and camera fails. The alarm events are stored to internal memory of multiplexer. 
Features include:- 
Duplex operation
10 channel, 
High resolution, 
On screen display, 
Time & date generator, 
Real time, 
Motion Detection
Alarm function, 
Telemetry control of PTZ
Quad , Sequence or Full screed display
Quad screen VCR output
Spot Monitor Outputs 
SPECIFICATIONS 

General 
Power supply 12 VDC 
Power consumption 7 W max. 
Range of operating temp. 0-40°C 
Humidity 85% max 
Dimensions 436 x 44.5 x 230 mm 
Weight 3 kg 
Picture parameters 
TV standards PAL (CCIR) 
Active TV lines 576 
Samples per TV line 864 
Number of colours 16 millions 
Video inputs 
Number of video inputs 10 (composite), 1 (S-VIDEO) 
Amplitude 0.75-1.5 Vpp 
Input impedance 75 W (detachable for composite only) 
Connectors BNC (composite), MINI DIN 4 (S-VIDEO) 
Outputs 
Number of video outputs 3 independent (composite), 2 S-VIDEO 
Amplitude 1 Vpp at 75 W 
Connectors BNC (composite), MINI DIN 4 (S-VIDEO) 
Alarm inputs 
Number of alarm inputs 10 
Activity Programmable 
Connector D-SUB25M 
Alarm output 
Output 2 low voltage relay contacts 
Switching voltage 40 V 
Switching current 0.5 A 
CAN bus 
Number of addressable devices 240 
Baud rate 50 kBd 
Bus length max. 1000 m 

Mono 16 Channel Duplex Multiplexer (Part number: 15-MP31) Monochrome 16 channel full duplex digital video multiplexer with alarm, on screen display, telemetry, motion detection, zoom, loop through including power supply

The 15-MP31 duplex multiplexer enables simultaneous recording and playback with the use of two digital independent channels. The first one is used for the live cameras displaying or for the playback on the split screen and the second one is used for the recording to the time lapse recorder.

Remote controlling of external equipment (PAN/TILT systems, lenses, multiplexers) by the CAN interface. 

The integrated activity detector observes all connected cameras continuously and provides their optimal recording. The alarm signal from the activity detector is leaded out to the alarm output.

The 15-MP31 has a wide range of alarm processing from alarm inputs, activity detector and camera fails. The alarm events are stored to internal memory of multiplexer. 
Features include:- 
Duplex operation
16 channel, 
High resolution, 
On screen display, 
Time & date generator, 
Real time, 
Motion Detection
Alarm function, 
Telemetry control of PTZ
Quad , Sequence or Full screed display
Quad screen VCR output
Spot Monitor Outputs 
SPECIFICATIONS 

General 
Power supply 12 VDC 
Power consumption 7 W max. 
Range of operating temp. 0-40°C 
Humidity 85% max 
Dimensions 436 x 44.5 x 230 mm 
Weight 3 kg 
Picture parameters 
TV standards PAL (CCIR) 
Active TV lines 576 
Samples per TV line 864 
Grey shades 256 
Video inputs 
Number of video inputs 16 (composite), 1 (S-VIDEO) 
Amplitude 0.75-1.5 Vpp 
Input impedance 75 W (detachable for composite only) 
Connectors BNC (composite), MINI DIN 4 (S-VIDEO) 
Outputs 
Number of video outputs 3 independent (composite), 2 S-VIDEO 
Amplitude 1 Vpp at 75 W 
Connectors BNC (composite), MINI DIN 4 (S-VIDEO) 
Alarm inputs 
Number of alarm inputs 16 
Activity Programmable 
Connector D-SUB25M 
Alarm output 
Output 2 low voltage relay contacts 
Switching voltage 40 V 
Switching current 0.5 A 
CAN bus 
Number of addressable devices 240 
Baud rate 50 kBd 
Bus length max. 1000 m 

Colour 16 Channel Duplex Multiplexer (Part number: 15-MP41) Colour 16 channel full duplex digital video multiplexer with alarm, on screen display, telemetry, motion detection, zoom, loop through including power supply

The 15-MP41 duplex multiplexer enables simultaneous recording and playback with the use of two digital independent channels. The first one is used for the live cameras displaying or for the playback on the split screen and the second one is used for the recording to the time lapse recorder.

Remote controlling of external equipment (PAN/TILT systems, lenses, multiplexers) by the CAN interface. 

The integrated activity detector observes all connected cameras continuously and provides their optimal recording. The alarm signal from the activity detector is leaded out to the alarm output.

The 15-MP41 has a wide range of alarm processing from alarm inputs, activity detector and camera fails. The alarm events are stored to internal memory of multiplexer. 
Features include:- 
Duplex operation
16 channel, 
High resolution, 
On screen display, 
Time & date generator, 
Real time, 
Motion Detection 

Alarm function, 
Telemetry control of PTZ
Quad , Sequence or Full screed display
Quad screen VCR output
Spot Monitor Out
SPECIFICATIONS 

General 
Power supply 12 VDC 
Power consumption 7 W max. 
Range of operating temp. 0-40°C 
Humidity 85% max 
Dimensions 436 x 44.5 x 230 mm 
Weight 3 kg 
Picture parameters 
TV standards PAL (CCIR) 
Active TV lines 576 
Samples per TV line 864 
Number of colours 16 millions 
Video inputs 
Number of video inputs 16 (composite), 1 (S-VIDEO) 
Amplitude 0.75-1.5 Vpp 
Input impedance 75 W (detachable for composite only) 
Connectors BNC (composite), MINI DIN 4 (S-VIDEO) 
Outputs 
Number of video outputs 3 independent (composite), 2 S-VIDEO 
Amplitude 1 Vpp at 75 W 
Connectors BNC (composite), MINI DIN 4 (S-VIDEO) 
Alarm inputs 
Number of alarm inputs 16 
Activity Programmable 
Connector D-SUB25M 
Alarm output 
Output 2 low voltage relay contacts 
Switching voltage 40 V 
Switching current 0.5 A 
CAN bus 
Number of addressable devices 240 
Baud rate 50 kBd 
Bus length max. 1000 m 

Multiplex Remote Keyboard (Part number: 15-MP01) Remote keyboard for use with any multiplex unit, allows remote operation of all functions up to a distance of 500 metres. including power supply

Multiplex Telemetry Receiver (Part number: 15-MP02) Telemetry receiver for use with any COP multiplex unit, can interface with any pan/tilt zoom unit.

  COP CCTV SECURITY PRODUCT SUPPLIERS